Ultimate Seats Cup Holder Camera Mount Retrofit
Turns the Ciro drink-holder arm on an Ultimate Seats rear seat into a locking camera mount. Same ball, same collar, new head.
$8.00
Fits: The Ciro drink-holder ball arm supplied with Ultimate Seats rear passenger seats (tested on our 2025 Gold Wing 50th Anniversary). The printed head clamps the stock 15.4 mm four-ridge ball with the stock M20x1.5 threaded collar; the cup holder itself stays intact and swaps back anytime.
The Ultimate Seats rear cup holder rides on a clever Ciro ball mount: a four-ridge ball, a flexing collet, and a knurled collar that locks the tilt. This head borrows all of that and points a camera with it. The collet is a faithful mate to the original: M20x1.5 external thread proven against the real collar, four keyway slots that lock the ball ridges against rotation, and a deep socket that clicks in like the factory cup. Two tops: a GoPro-standard three-prong (community-standard 9.5 mm hole height) and a 1/4-20 tripod platform that carries a captive steel bolt so printed threads never take the vibration load. Both include a tether eye. Every fit dimension was proven with printed gauge coupons against the actual hardware before this page went up.
Print settings
How we print it
- MaterialASA
- Layer height0.2 mm
- Infill40%
- SupportsNo
- Print timeabout 1 hour per head
Independent aftermarket part. Not affiliated with, endorsed by, or sponsored by Airstream, Rivian, or any vehicle manufacturer. Brand names describe fitment only. Printed parts have limits: check the fit and load rating for your use before you rely on one.