Gold Wing 50th Kickstand Pad
A side-stand pad for the Honda Gold Wing 50th Anniversary, so a heavy tourer does not sink on soft ground.
Free download
Download the STLFits: Every 2018-2026 Honda Gold Wing and Gold Wing Tour: Honda uses one side-stand part (50530-MKC-A00) across the whole generation. Measured on our 2025 50th Anniversary (about 50 x 27 mm contact patch, tapered). The cradle is parametric, so it resizes to other side stands.
Sized for the Honda Gold Wing 50th Anniversary Edition. A wide side-stand pad so a heavy tourer does not sink into grass, gravel, or hot asphalt. The stand foot drops into a recessed cradle that holds it on all four sides, and a chamfered lead-in lets it self-seat when you set the bike down. The teardrop shape spreads the load without a bulky disc and tapers to a grab tab, and the cradle follows the taper of the stand foot itself. The underside carries a raised edge rim, angled tread bars that bite soft ground, and a stamp die that presses wattreach.com into the dirt; the letters stand 0.8 mm deeper than the tread so the imprint reads clean. Top surfaces are ironed in the slicer for a smooth, molded finish. Printed in ASA so it takes heat and sun without going soft. The source is parametric, so the cradle resizes to other side stands.
Print settings
How we print it
- MaterialASA
- Layer height0.2 mm
- Infill80%
- SupportsNo
- Print timeabout 3h with ironing
Independent aftermarket part. Not affiliated with, endorsed by, or sponsored by Airstream, Rivian, or any vehicle manufacturer. Brand names describe fitment only. Printed parts have limits: check the fit and load rating for your use before you rely on one.